Hi,
I'm in search of [free] software that will preferable have a server and client function and be able to accurately test the throughput of a) a LAN, b) a LAN-2-LAN VPN, c) and Remote-2-LA...
I am having a problem where our internet slows down to a crawl due to internal use/abuse. However, I have absolutely no way of monitoring LAN to WAN usage based on IP. I'm using a Netgear Pros...
Greetings all
I am in search of an application (something EASY to use, and FREE, if possible) that will monitor bandwidth.
My situation is as follows:
1. I have a desktop Pc with an ...
Hello,
I have a network with 50 machines connected to the internet using a broadband. The machines are
generating a lot of traffic, so i need to detect how much bandwith is
consuming ea...
Ok First off Thanks to CoreyMac.
This is a follow up question to my question posted here...
http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_23714951.html#a22...
Hi..
Office 1 SQL 2000 server
Office 2 connects to SQL server via a 10M fibre link
User at Office 2 are getting slow response time from the SQL server
Can I use wireshark to spot th...
Hello,
I have a Conferencing bridge (Avaya) which takes SIP/VoIP calls from an Internet Telephony Service Provider (ITSP), Voxbone. The quality has been perfect until about 2 weeks ago when...
Hi,
I am trying to monitor network usage in my home environment.
I have a Netgear wireless ADSL router through which all the machines on my network connect to the net. The Router managem...
Friends,
I just configured a Linux based CACTI. I am able to get and view the graphs which is generated by cacti. But in those graphs, there is no value(data) for Inbound and outbound ( Min, ...
I have a network of 50 users on a T1 line. The T1 uses a Cisco 1800 router.
I need to monitor and ideally capture my network traffic statistics. Mainly I need to monitor bandwidth usage in ...
In wireshark it show that a few of my machines have traffice to a domain controller that is not in the domain any more. it gererates traffice on nbns protocol, what causes this and how can ...
Hi all,
I'm looking for some advice on how to best analyze my network, either by using free tools, purchased tools, or even outsourcing this to a company specializing in this. We do not wan...
Site 1 and Site 2 are connected by a 10mps Fibre link
I am monitor the Cisco 2900 switch port that links directly to the fibre (Via SPAN) with wireshark and a laptop.
Over a 5 mins peri...
How do i do an IOS upgrade on a cisco 6509 (wth SUP 720 ) , 1811, 7513, 1801
I have a large collection of packets i've been sniffing... the issue is there is a lot of data from various connections, etc.
I wanted to find out if it was possible to search the actual pa...
I am experiencing some delays on my trading computer. The trading computer is pulling in realtime price data. I am fairly confident that it is not my office computer. I am connecting to the...
Yesterday my office experienced a power outage that lasted roughly 2 hours. Although I was able to gracefully shutdown my servers, most of our network computers are set to reboot upon power f...
Hi
I am a sys admin with about 60 users and 7 servers. We have recently replaced our swithces with managed gigabit 3com switches.
Someone on the network is uploading MASSIVE amounts of...
Experts:
I have a Firewall/Router, a 3COM 4200G Switch, a Linksys Hub and a Dell Workstation. I have a firewall/router connected to this managed switch that supports port mirroring. I need he...
I need to create a list of available IP addresses in a certain range and I was told nmap was a good tool to use. Unfortunately, I've never used nmap before and I can't seem to make it do exact...
Someone caused a network loop and all workstatons and servers became unuseable at a customer site. There was a message in the system tray of each workstation and server that said duplicate IP ...
Hi,
I ran a capture to a mirrored port on my system to capture all traffic. Afterwards I used the 'Statistics option to see the endpoint list for Ipv4. I believe this gave me an avg/bytes ...
I have mrtg which graphs cisco 10k router traffic input and output on interfaces. It graphs well except on 1 interface (POS). On this interface the input rate on sh int and on the graph don't ...
Let me start by saying I am a beginner with cisco routers, I am studying for my CCNA, and just got ahold of a Cisco 2811 router. It has a 4 port HWIC card in it. Like I said I am studying for ...
SQL 2000 server at site 1
Clients at site 2 getting slow responce time to data application on SQL server at site 1
Sites are connected via a 10Mps Fibre line that never sents or receives mor...
