I am using Linksys Quick Connect and Linksys WRVS4400N and I can not connect.
I get this message "Server's certificate doesn't exist on your local computer. Do you want to quit this connect...
I am attempting to set up a remote access vpn on a cisco 5510 ASA.
I am running the cisco 5.0.3.0560 vpn client on vista.
The VPN connects and I have access to the network however it takes...
I got a few XP boxes and a few Vista boxes and on the server I want to make it so when a user connects to the VPN it will map a network drive. How could I go about doing this?
hi all,
I need to run a script (a simple batch file to map some drives) after the XP VPN client dialup is established.
If I were connecting to an AD server i could do this with logon scr...
Setting up Built in VPN Client in Microsoft Vista SP1. Connecting it to Netgear ProSafe FVS318 V2.2 VPN Router.
I get following error on Netgear Router VPN logs :
Tues, 09/02/2008 13:22:46 ...
This is a home network with a linksys wrt54g router connecting to my cable modem. It has port 1723 forwarded to my vpn server and pptp passthrough enabled.
I have an XP Pro machine acting a...
Hi,
I have an IPSec, site-to-site VPN tunnel between two PIX 515e's. The tunnel itself is working fine.
I have 2 config changes i would like to make, but don't really know how;
1) I ...
I have a sonicwall ssl vpn 200 and i for got the admin passoword. How can i login or reset the passoword with out loosing the setting on the vpn 200
please help
Thanks,
Peter
I've built an IPSec remote access vpn on a Cisco ASA 5510 running 8.0(3) software. Authentication to Active Directory is working fine with LDAP, but the clients get the wrong default gateway ...
Hi
My boss accidenlty wiped the flash of an asa 5505. No you can only logon as rommon and not really do much. Can anyone help. Here is the error message
Default configuration file co...
I can connect my Cisco VPN client (v 5.0.03) to the ASA 5510 firewall and see the tunnel come up on the ASDM interface. However, I cannot access anything on the internal network from my clien...
Hi,
I have a Windows 2003 server which I am trying to configure OpenVPN to run on, and then to have all data from my client routed over the server.
The requirement is due to working in ...
I have recently set up a network connecting 3 physical locations (1 location has servers, other 2 locations have only workstations and VoIP phones) using SonicWall TZ190 units as border router...
Hello,
Well so far I've worked only on IPSec VPN in ns5gt with the help of GreenBow as a VPN client.Now,i am having two Linksys R...
I have a VPN tunnel which keeps dropping on one end I have a NS-5GT and on other end NS5XP
My system log show "Phase1 Retransmission limit has been reached"
Not much on google
any help wou...
We have a user using a VPN connection from her home computer and using remote desktop to connect to her workstation here in our office. She is running a fully updated Windows XP Pro sp2 machi...
Client OS: WinXP SP2
[Potential] Conflicting Software: ZoneAlarm, Blue Coat ProxyClient, VMware Workstation and Sprint WWAN Connection Mgr.
I first attempted to upgrade my Cisco VPN Client...
Outside Consultant who has a VPN connection to my company is not able to send emails from her company email when connected through VPN . When disconnects from VPN is able to send emails. No ...
I have configured a vpn connection from home. the server i am connecting to is 192.168.1.xx. the PC is connected via a BT homehub which also has a 192.168.1.xx range. does any one know how I c...
I have two sight which i would like connect via a box to box vpn. Both have static WAN addresses and both have Netgear dg834g adsl modemm routers. one i slighly older at the main office it is ...
Hello. I have a Cisco ASA 5505 device that I recently put into place. I have it up and running and users can get to the Internet just fine. I have recently been asked to try to configure it to...
We have 3 "mobile users" using laptops with Norton 360, Windows firewall turned off and connecting from the outside using Watchguards Mobile VPN connection. All connections are set up exact...
I went thur the vpn wizrad and it seemed very straight forward, but i'm not able to connect. I went with all the defualt settings added two user to the user group. The log file for the vpn lo...
Hi,
This is problem. I have 4 routers. One is set up as a Easy VPN server, the others are remote clients. The clients connect with the server router and you can ping the network on the server...
I am all of a sudden having problems with Remote Desktop Connection disconnecting after several minutes, sometimes as little as 5 minutes, sometimes as much as 45. I connect to the VPN server ...
